6 configurations priced new, used and monthly. Delivered and set nationwide in a 30 to 90 day production window.







New, used and monthly rental across every configuration we build. Researched market estimates, July 2026.
| 480 sqft exam suitenew · used · monthly | $168,000— used · $4,200/mo |
| 768 sqft clinicnew · used · monthly | $248,000— used · $5,600/mo |
| 1,200 sqft medical clinicnew · used · monthly | $348,000— used · $7,400/mo |
| 1,000 sqft laboratory (sterile-ready)new · used · monthly | $412,000— used · $8,900/mo |
| 1,440 sqft urgent carenew · used · monthly | $448,000— used · $9,600/mo |
| Mobile screening unitnew · used · monthly | $196,000— used · $4,800/mo |
Estimates for budgeting. Final pricing depends on configuration, finish level, site conditions and freight distance.
The modular medical building is one of the most requested configurations we quote, and it is also one of the most inconsistently priced across the industry. Suppliers publish a per-square-foot figure, leave out foundation, freight, crane and permitting, and the number a buyer eventually pays lands well above what they planned around. We publish the unit price and the site costs separately so the comparison is honest.
| Typical cost per square foot (new) | $290 |
| Premium specification per square foot | $380 |
| Configurations priced | 6 |
| Price range (new) | $168,000 – $448,000 |
| Production window | 30–90 days, queue dependent |
| On-site set | 2–8 hours typical per unit |
| Delivery | All 50 states · $7 per loaded mile |
New units carry full warranty, current code compliance and the finish level you specify. Used and refurbished inventory typically runs forty to sixty percent below new, with the trade-off being available configurations rather than condition — a refurbished unit is stripped, inspected, repaired and re-finished, but you take the floor plan that exists. Rental makes sense under roughly eighteen months of use; past that point, cumulative rent generally exceeds purchase price and you own nothing at the end. Run the arithmetic on your actual duration before defaulting to rental because the monthly number feels smaller.
Size is the obvious variable, but it is rarely the one that moves a quote the most. Finish level, mechanical capacity, code requirements in your jurisdiction, and site conditions all shift the total more than a few extra square feet. A unit destined for a high-wind coastal county needs impact-rated openings and engineered tie-downs. A unit for a site with no municipal sewer needs a septic system. Neither of those is visible in a per-square-foot figure, which is exactly why we break them out.
We quote 30 to 90 days as a production window rather than a delivery date, and the reason is supply and demand. Factory queue depth changes weekly. Material lead times on steel, windows and finish goods have tightened this year and seasonal demand compresses the calendar heading into spring. A slot confirmed today holds at the window we quote. A slot considered for six weeks usually reprices, because the block it was going into has filled.
At 480 sqft exam suite, expect roughly $168,000 new, or $4,200 per month on rental. This size typically clears standard highway transport without special permitting, which keeps freight predictable.
At 768 sqft clinic, expect roughly $248,000 new, or $5,600 per month on rental. Availability on this size varies with the production block, so confirm before planning around it.
At 1,200 sqft medical clinic, expect roughly $348,000 new, or $7,400 per month on rental. This configuration balances usable space against freight cost well, which is why it is frequently specified.
At 1,000 sqft laboratory (sterile-ready), expect roughly $412,000 new, or $8,900 per month on rental. This size typically clears standard highway transport without special permitting, which keeps freight predictable.
At 1,440 sqft urgent care, expect roughly $448,000 new, or $9,600 per month on rental. Buyers often size up from here once they see the marginal cost per additional square foot.
At Mobile screening unit, expect roughly $196,000 new, or $4,800 per month on rental. This configuration balances usable space against freight cost well, which is why it is frequently specified.
The reason site-built budgets drift is that the price is discovered as the work proceeds. Factory pricing is set when the design is locked, because the production cost of a known module is known. The variable that remains is site work — foundation, utilities, access — which is why we quote that separately and in the open instead of burying it.
Every unit off a line is built to the same specification with the same crews and the same materials. That repeatability is impossible to achieve across independent site-built projects with rotating subs. If you inspect one finished unit, you have meaningfully inspected the one you are buying.
A module built indoors never sits in the rain waiting on a framing crew. Lumber does not swell, drywall does not wick moisture, and the schedule does not slip because a storm parked over the site for nine days. That single difference — controlled environment versus open air — is most of why factory-built assemblies test tighter on a blower door than comparable site-built work.
Site-built construction is sequential: permit, then excavate, then frame, then finish. Factory-built runs the site work and the building in parallel. While your foundation is being poured and utilities are being trenched, the structure is already being framed and finished on a production line hundreds of miles away. That overlap is where the calendar savings actually come from, not from anyone working faster.
Tell us the scope and the ZIP. You get a real delivered-and-installed number, not a "contact us for pricing" runaround.
We run a group of focused sites so you land on the one that matches what you actually need instead of a catch-all catalog.